Hyperbaric Chamber Buying Guide: Soft-Shell, Hard-Shell, Accessible & Two-Person Models
The right hyperbaric chamber starts with the intended setting, entry needs, available space, occupancy, and the exact configuration your qualified professional recommends. Soft-shell, hard-shell, accessible, and two-person systems differ substantially in construction, dimensions, weight, delivery, installation, and operating requirements.
This guide compares the MedEq Fitness chamber formats currently offered by Summit Revive. Specifications are based on supplier-provided information and should be confirmed against the final build sheet before purchase.
Which chamber format fits your space and intended setting?
Start with the way the chamber will be entered and used, then work backward through room dimensions, doorway and hallway access, floor loading, electrical requirements, and professional oversight.
Swipe the tables sideways on a phone to see every column.
| Format | Consider when… | Confirm before ordering | Planning consideration |
|---|---|---|---|
| Lying soft-shell | You want a lower-weight, capsule-style chamber and will enter in a lying position. | Exact size, frame, supplied accessories, pressure configuration, and electrical requirements. | “Foldable” does not mean no setup is required; allow room for the chamber and operating equipment. |
| Seated or reclining soft-shell | A chair-based, reclining, or lying configuration is preferred. | Chair, host equipment, supplied components, clearance, and selected color/configuration. | The larger inflated footprint must be planned before delivery. |
| Accessible soft-shell | Wheelchair or chair accommodation and a sloped entry are priorities. | Usable entry width, turning clearance, base load, and final accessibility requirements. | Confirm the exact chair or mobility device fit rather than relying only on exterior dimensions. |
| Single-person hard-shell | You need rigid construction and a fixed installation for one occupant. | Final drawings, system weight, floor loading, route into the room, electrical service, and installation. | Hard-shell systems are heavy and require detailed site planning. |
| Two-person hard-shell | Two-person occupancy is required and the site can support a large, heavy installation. | Engineering/build sheet, delivery route, floor loading, assembly quote, and operating-equipment layout. | This is a major freight and installation project, not a standard parcel delivery. |
Compare hyperbaric chambers available from Summit Revive
The pressure figures below are supplier-listed ranges or maximums and vary by configuration. They are not a recommendation for use. Confirm current configurations, included equipment, pricing, shipping and warranty in writing before ordering. Hyperbaric chambers are final sale: no returns accepted. Specifications reviewed October 23, 2026.
| Model | Format | Occupancy / position | Supplier-listed pressure | Supplier-listed dimensions | Key planning point |
|---|---|---|---|---|---|
| TimeCapsule Air 1.5 | Soft-shell capsule | One person / lying | 1.3 or 1.5 ATA | 80 × 200, 85 × 210, or 90 × 220 cm | Confirm the exact size and which frame, cooler, mattress, and accessories are included. |
| TimePod Air 1.5 Pro | Soft-shell | One person / seated, reclining, or lying | 1.4 ATA standard; up to 1.5 ATA by configuration | 230 × 120 × 120 cm | Confirm the Pro equipment package, voltage, chair, and final build sheet. |
| TimePod Air Wheelchair-Accessible | Soft-shell with aluminum base and entry slope | Wheelchair or chair accommodation | 1.2, 1.3, or 1.4 ATA | 170 × 160 × 190 cm | Confirm entry, turning, chair, weight, and room clearances for the actual user and equipment. |
| TimeCapsule Vision C750+ | Cylindrical hard-shell | One person | 1.5, 1.6, or up to 2.0 ATA by configuration | 220 cm long × 75 cm diameter | Supplier lists a 230 kg chamber weight; confirm system weight, floor loading, and delivery route. |
| TimeCapsule Vision C900+ | Wider cylindrical hard-shell | One person | 1.5, 1.6, or up to 2.0 ATA by configuration | 220 cm long × 90 cm diameter | Compare its wider diameter with room access, floor loading, and final system configuration. |
| TimePod 2 | Triangular hard-shell | One person | 1.3–2.0 ATA by configuration | Approximately 200 × 87 × 153 cm | Supplier lists a 600 kg weight; verify engineering drawings, floor loading, power, and installation. |
| TimePod Ultra 2 | Two-person hard-shell | Two people | Up to 2.0 ATA | Final engineering/build sheet required | Final chamber and complete-system weights require confirmation against the supplied engineering/build sheet; delivery and installation require separate planning. |
Plan the room, access path, and operating equipment
Measure more than the chamber footprint
Document the usable room dimensions, ceiling height, door and hallway widths, turning points, stairs, elevators, floor type, and the final placement area. Allow service clearance around the chamber and space for host units, compressors, concentrators, coolers, tubing, controls, and ventilation as required by the confirmed system.
Verify weight and floor loading
Hard-shell chambers can weigh hundreds of kilograms before associated operating equipment is considered. The C750+ listing notes a 230 kg chamber weight, the TimePod 2 listing notes 600 kg, and TimePod Ultra 2 chamber and complete-system weights require build-specific confirmation. Have the site and floor capacity evaluated as appropriate for the intended installation.
Confirm entry and accessibility
Exterior dimensions alone do not establish that a person, wheelchair, or chair will fit through the entrance or function comfortably inside. Confirm usable openings, approach space, turning clearance, permissible load, transfer needs, and any assistance requirements before ordering.
Confirm the complete purchase scope in writing
Hyperbaric chambers are configured products with freight, access, installation, and support requirements that can differ by model and destination. Summit Revive will confirm the following before fulfillment:
- Exact configuration: model, pressure configuration, color, size, voltage, frequency, plug, host units, concentrator, compressor, cooler, chair, frame, mattress, controls, and accessories.
- Space and utilities: final drawings, service clearances, ventilation, electrical requirements, floor loading, and placement conditions.
- Shipping: freight charge, processing time, transit estimate, carrier service, appointment requirements, unloading, threshold or inside-delivery scope, and access limitations.
- Installation and training: what arrives assembled, what requires assembly, who performs installation, whether commissioning or training is included, and any separate quote.
- Warranty: manufacturer term, covered components, exclusions, labor, freight, and the service/claim process for a Summit Revive purchase.
- Returns and cancellations: Hyperbaric chambers are final sale; no returns accepted. Confirm cancellation terms before ordering and contact Summit Revive promptly about damaged, defective or incorrect items.
Hyperbaric chamber buying questions, answered
What is the main difference between soft-shell and hard-shell chambers?
Soft-shell models use flexible TPU-based construction and are generally lighter. Hard-shell models use rigid metal or engineering-material construction and require more detailed freight, floor-loading, access, and installation planning. Pressure configuration also differs by model; it should be evaluated only with appropriate professional guidance.
Which model works for seated or wheelchair entry?
The TimePod Air 1.5 Pro is listed for seated, reclining, or lying positions. The TimePod Air Wheelchair-Accessible model has an aluminum base and entry slope for wheelchair or chair accommodation. Confirm actual entry dimensions, turning clearance, permissible load, and the user’s specific access requirements before ordering.
Can I choose a chamber from room dimensions alone?
No. Room fit is only one part of the decision. You also need to confirm the route into the room, service clearance, floor loading, electrical requirements, ventilation, operating-equipment placement, intended use, professional oversight, and the final supplied configuration.
Are shipping and installation included?
Do not assume free shipping or installation. Freight, delivery method, access requirements, unloading, assembly, installation, commissioning, and training must be confirmed for the selected chamber and destination before ordering.
Which chamber should I choose?
Begin with qualified professional guidance and the intended setting. Then compare entry needs, occupancy, usable interior space, room fit, weight, floor loading, utilities, delivery access, included equipment, warranty, and service requirements. Summit Revive can coordinate the product and supplier details needed for a complete comparison.
Plan your chamber with fewer surprises
Tell our team about the intended setting, available room, entry path, accessibility needs, occupancy, and desired configuration. We will help confirm the supplier specifications, purchase scope, and logistics before you order.
